Description
Koike WEL-HANDY Multi II Tack Welding Machine / Portable Welding Carriages
- Tack welding is made by repeating welding and dry-run traverse alternatively. Automatically switched to maximum speed during dry-run traverse to improve work efficiency.
- Ultra-compact & lightweight The 6.8 kg light weight unit gives improved handling and set-up.
- Strong drawbar pull 16 kg magnetic force assures a stable motion.
- Solid structure Maintenance free aluminum die cast body makes it lighter and durable.
- High speed operation Maximum speed of 1500 mm/min can achieve high-speed welding
- Low center of gravity design Low center of gravity gives constant motion.
- High clearance It can run over weld beads easily.
- Easy data input Tack information is digitally input and stored to ensure repeatability. Data is input by distance not time to ensure same welding length at different speed. It can include arc stable timer, crater time and crater fill distance in the parameters.
- Digital display Digital display shows actual parameters or welding speed.
| Machine Weight | Standard Magnet Model: 6.9 kg | |
| Strong Magnet Model: 7.5 kg | ||
| Machine Dimension(WDH) | 277mm(W)255mm(D)264(H) | |
| Traction Force | 16kg | |
| Gap(F.L. ~ Bace Board) | 6mm | |
| Magnet Up and Down Mechanism | Magnet Lever | |
| Driving Method | 4-Wheel Driving Rubber Roller (Chain Transmission) | |
| Magnet-type | Permanent Magnet | |
| Traverse Speed | 50~1500mm/min | |
| Tracing Method | Guide Roller (being pushed against Vertical plates) | |
| Applied Posture | Standard Magnet Model: Horizontal position Fillet Welding | |
| Strong Magnet Model: Vertical position Fillet Welding | ||
| Torch Adjust Range | Torch Angle | 40~55 |
| Up and down | 45mm | |
| Forward and Backward | 45mm | |
| Forward and Angle | 5 Angle at both Forward / Backward | |
| Automatic Stop Function | Limit Switch | |
| (equipped at both sides of Carriage at FL +20 mm height) | ||
| Fine Adjustment of Carriage Position | Included | |
| Non-Welded Portion | Approximately 270 mm | |
| (in total at both Start and End point) | ||
| Power Cable | Y-Branch Cable (Power and Signal cable Integrated) | |
| Carriage ~ Branch: 6 m, | ||
| Branch ~ Power: 10 m, | ||
| Branch ~ Wire Feeder: 0.5 m (with matching Panasonic-type Connector) | ||
| Please consult when using welding machine other than Panasonic. | ||
| Welding Torch | Straight WHM (C) 350S & 500S | |
| Curved 350A & 500A | ||
| Torch Hold Diameter | Straight Torch Holder: 20 mm | |
| Curved Torch Holder: 16~20 mm Diameter | ||
| Motor | DC Motor with Encoder | |
| Input Power | AC100~240V50/60Hz |
Reviews
There are no reviews yet.