Mitutoyo 500-181-30 Digimatic (Digital) Caliper ‘MyCAL ABSOLUTE’ 150mm

Description

Precision is our Profession

Mitutoyo 500-181-30 Digimatic (Digital) Caliper ‘MyCAL ABSOLUTE’ 150mm
SERIES 500 with exclusive ABSOLUTE Encoder Technology

A built-in ABS (absolute) scale means that these calipers are ready to use immediately
after power-on without origin resetting – just like using a Verniercaliper .

• Range: 0-150mm (Metric)
  
• Graduation: 0.01mm

The 500-151-30 is an Absolute Digimatic Caliper equipped with the electromagnetic induction type absolute encoder and AOS (advanced onsite sensor) applied for ABS coolant-proof calipers. The slider provides smooth, stable and comfortable operation. A battery life of approximately 3.5 years has been achieved under normal use through the adoption of Mitutoyo’s ABSOLUTE scale. The carbide-tipped jaw model is ideally suited to the measurement of rough-machined work-pieces, castings and grindstones. The data output function allows integration into statistical process control and measurement systems. The ABS (absolute) measurement function enables absolute-mode measurement to be started without any zero-setting after switch-ON. The absolute origin position can be set or reset with the ORIGIN switch at any time.

• Step-measurement capable
• Slider configuration features an ergonomic, thumb-friendly shape
• Alleviation of fatigue with the high-contrast LCD
• Carbide-tipped jaws for outside measurement

Applications

Industrial, Test & Measurement

Features

Technical Data
Accuracy: 0.02 mm (s200 mm), 0.03 mm (s300 mm)
(excluding quantizing error)
Resolution: 0.01 mm or 0.0005 in I 0.01 mm
Repeatability 0.01 mm
Display: LCD
Scale type*: ABSOLUTE electromagnetic induction linear
encoder
*ABSOLUTE electrostatic capacity static linear encoder for
0 – 300 mm I 0 – 12 inch models.
Max. response speed: Unlimited
Battery: SR44 (1 pc), 938882,
for initial operational checks (standard accessory)
Battery life: Approx. 5 years under normal use (1 8,000
hours for continuous use)

Function

• Absolute measurement: After power is turned ON,measurement can be started without zero-setting if origin-setting was previously performed. The Absolute origin position can be changed by the ORIGIN button.

• Incremental measurement: Display can be set to zero at any arbitrary position for comparative measurements

• Low-voltage alert: If the battery voltage becomes low, a “B” appears in the display to alert the user before measurement is no longer possible. A battery change advisory alert precedes this alert.

• Data output By using the connecting cable (option), measurement data can be output.

• Data hold: By using the data hold unit (option), the displayed value can be held. This cannot be used with the data output function.

*Certificate of Inspection and Calibration is available by request with for a fee.