Description
Trisco R-510D Digital Battery Load Tester (200A)
- Quickly identifying problems in battery, electrical or charging systems in 20 second test.
- Heavy duty cable and copper plated clamps.
- Stainless steel housing.
- Battery Analysis: Check the result after 10 seconds with load switch on.
| Load Test | Battery Condition |
| OK (Green LED) |
Battery capacity is OK. The Battery may or may not be charged fully. In order to determine the state of the battery charge, check the specific gravity by using a hydrometer. If specific gravity is less than full charge, check the possibility of charging system troubled, or electrical drain. Recharge the battery to full charge. |
| WEAK (Yellow LED) |
Battery capacity is unsatisfactory. Battery may be either defective or partly discharged. Check the specific gravity to determine the reason. If gravity is over 1.225, the battery is considered defective. If gravity is under 1.225, re-charge battery and re-test. If cell-to-cell gravity varies more than 0.025 (25 points), cell trouble may exist. If charging doesn’t bring specific gravity to full charge level, replace the battery. |
| BAD (Red LED) |
Battery may be defective or worn-out. For more accurate results, check gravity and follow above procedure. |
| Temperature Compensation | |||
| Battery Temperature | +20F(-7C) | 0F(-18C) | -20F(-29C) |
| Decrease Bat. Rating by | 1 Step | 2 Step | 3 Step |
| 1 Step = 200 Cranking Amps. (200Ah) |
Reviews
There are no reviews yet.